Anritsu MS2840A - Page 124

Chapter 2 SCPI Device Message Details
2-114
When omitted: Marker 1
<freq>
Center frequency of zone marker
Range
[MS269xA]
–100 MHz to 6.05 GHz (MS2690A)
–100 MHz to 13.6 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 44.6 GHz (Option 046)
Resolution 0.01 Hz
Suffix code None
Default X-axis center
<time>
Center time of zone marker
Range –1000 to 1000 s
Resolution 0.01 s
Suffix code None
Example of Use
To query the center of the zone marker of Marker 1.
CALC:MARK:X?
> 100000000.00
Related command
This command has the same function as the following commands.
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
X?