Anritsu MS2840A - Page 221

2.6 Trace
2-211
2
SCPI Device Message Details
> #44004<4004 bytes of data>
the “4” after “#” indicates that “this is followed by 4 characters indicating
the binary data length.”“4004” indicates that “this is followed by 4004
bytes of binary data.”
Details
This function writes or queries the trace data of the Positive detection,
when the detection mode is Positive & Negative (Normal mode).
–999.0 is returned for traces A, B, C, D, E and F while the Spectrum
Emission Mask measurement is performed.
–999.0 is returned for traces B, C, D, E and F while the Spurious
Emission measurement is performed.
–999.0 is returned for Gate View when Gate View is set to Off.
Example of Use
To query the data of Trace A.
TRAC? TRAC1
> -20.000,-20.231,-21.233,...