Anritsu MS2840A - Page 223

2.6 Trace
2-213
2
SCPI Device Message Details
Details
This function queries the trace data of the Negative detection, when the
detection mode is Positive & Negative (Normal mode).
–999.0 is returned for traces A, B, C, D, E and F while Spectrum
Emission Mask measurement is performed.
–999.0 is returned for traces B, C, D, E and F while Spurious Emission
measurement is performed.
–999.0 is returned for Gate View when Gate View is set to Off.
Example of Use
To query the data of Trace A.
TRAC:NEG? TRAC1
> -20.000,-20.231,-21.233,...