Anritsu MS2840A - Page 337

2.8 Measure Function
2-327
2
SCPI Device Message Details
When Standard is set to Mobile WiMAX (Spectrum Emission Mask
measurement)
<pattern>
Parameter to be set
10M
10 MHz BW (Channel Bandwidth 10 MHz)
5M
5 MHz BW (Channel Bandwidth 5 MHz)
When omitted: 10 MHz BW
When Standard is set to Mobile WiMAX (Burst Average Power
measurement)
<pattern>
Parameter to be set
5MS_FRAME
5 ms Frame (Power measurement of 1 frame)
When omitted: 5 ms Frame
When Standard is set to LTE Uplink/Downlink (ACP measurement)
<pattern>
Parameter to be set
1M4BW_UTRA5MHZ
1.4 MHz BW (UTRA 5 MHz)
1M4BW_EUTRA1M4HZ
1.4 MHz BW (E-UTRA 1.4 MHz)
3MBW_UTRA5MHZ
3 MHz BW (UTRA 5 MHz)
3MBW_EUTRA3MHZ
3 MHz BW (E-UTRA 3 MHz)
5MBW_UTRA5MHZ
5 MHz BW (UTRA 5 MHz)
5MBW_EUTRA5MHZ
5 MHz BW (E-UTRA 5 MHz)
10MBW_UTRA5MHZ
10 MHz BW (UTRA 5 MHz)
10MBW_EUTRA10MHZ
10 MHz BW (E-UTRA 10 MHz)
15MBW_UTRA5MHZ
15 MHz BW (UTRA 5 MHz)
15MBW_EUTRA15MHZ
15 MHz BW (E-UTRA 15 MHz)
20MBW_UTRA5MHZ
20 MHz BW (UTRA 5 MHz)
20MBW_EUTRA20MHZ
20 MHz BW (E-UTRA 20 MHz)
When omitted: 5 MHz BW (UTRA 5 MHz)
When Standard is set to LTE TDD Downlink (ACP Measurement)
<pattern>
Parameter to be set
1M4BW_UTRA1M6HZ
1.4 MHz BW (UTRA 1.6 MHz)
1M4BW_EUTRA1M4HZ
1.4 MHz BW (E-UTRA 1.4 MHz)
1M4BW_ADV
1.4 MHz BW (Adv Mode)
3MBW_UTRA1M6HZ
3 MHz BW (UTRA 1.6 MHz)
3MBW_EUTRA3MHZ
3 MHz BW (E-UTRA 3 MHz)
3MBW_ADV 3
MHz BW (Adv Mode)
5MBW_UTRA1M6HZ
5 MHz BW (UTRA 1.6 MHz)
5MBW_UTRA5MHZ
5 MHz BW (UTRA 5 MHz)
5MBW_UTRA10MHZ
5 MHz BW (UTRA 10 MHz)
5MBW_EUTRA5MHZ
5 MHz BW (E-UTRA 5 MHz)
5MBW_ADV
5 MHz BW (Adv Mode)
10MBW_UTRA1M6HZ
10 MHz BW (UTRA 1.6 MHz)
10MBW_UTRA5MHZ
10 MHz BW (UTRA 5 MHz)