Anritsu MS2840A - Page 342

Chapter 2 SCPI Device Message Details
2-332
NS6_1_4M
NS-06/07 1.4MHz
NS6_3M
NS-06/07 3MHz
NS6_5M
NS-06/07 5MHz
NS6_10M
NS-06/07 10MHz
When omitted:
General 5MHz
When Standard is set to ETC_DSRC (Applies to all but Burst Average
Power, Spectrum Emission Mask measurement)
<pattern>
Parameter to be set
PI4DQPSK
π
/4DQPSK
ASK
ASK
When omitted:
π
/4DQPSK
When Standard is set to ETC_DSRC (Burst Average Power
measurement)
<pattern>
Parameter to be set
MEAN
Mean Power
When omitted: Mean Power
When Standard is set to TD-SCDMA (ACP Measurement)
<pattern>
Parameter to be set
TDD128M1C
Single Carrier
TDD128M2C
2 Carriers
TDD128M3C
3 Carriers
TDD128M4C
4 Carriers
TDD128M5C
5 Carriers
TDD128M6C
6 Carriers
When omitted: Single Carrier
When Standard is set to TD-SCDMA (CHP, OBW Measurement)
<pattern>
Parameter to be set
TDD128M
3GPP TDD 1.28 Mcps Option
When omitted: 3GPP TDD 1.28 Mcps Option
When Standard is set to TD-SCDMA (Burst Average Power
Measurement)
<pattern>
Parameter to be set
MEAN
5 ms Subframe
(Power measurement of 1 subframe)
When omitted: 5 ms Subframe
When Standard is set to TD-SCDMA (Spectrum Emission Mask
Measurement)
<pattern>
Parameter to be set