Chapter 2 SCPI Device Message Details
2-542
<trace_point>
Trace point number
Suffix code None. “–999.0” is returned when no
measurement is executed.
Details
This function outputs the measurement result of the OBW measurement
performed last. It is possible to output the measurement result in a state
that the measurement has already been done, and in a different style.
You can use the READ command if you perform a measurement along
with starting the sweep again.
Return values of this function vary according to the result
mode.(cf. :SYSTem:RESult:MODE)
Example of Use
To obtain the measurement result of OBW measurement. (n=1)
FETC:OBW?
> 30000,1000000000,900050000,1000050000
To Next Page
Loading...
