Anritsu MS2840A - Page 881

2.17 Configuring Batch Measurement Settings
2-871
2
SCPI Device Message Details
Example of Use
To acquire the peak value of absolute power of SEM measurement using
the MyParam.xls parameter list file (n = 10).
MEAS:BATC:SEM10? "MyParam"
>
999.0,-999.0,-100.000,-100.000,-60.000,-60.000,45.000,-4
5.000,-30.000,-30.000,-10.000,-10.000,0.000,0.000
Parameter list format
Table 2.17-6 lists the parameter list example.