Juniper ACX2000 Configuration Guide

Table 127: show chassis fpc Output Fields (continued)
Level of OutputField DescriptionField Name
all levelsSlot number.Logical slot
all levels
all levels
Temperature of the air passing by the FPC, in degrees Celsius or in both Celsius
and Fahrenheit.
Temp (C) or
Temperature
detailOn PTX Series Packet Transport Routers, temperature details are provided in
degrees Celsius and Fahrenheit. Output includes:
• Temperature (PMB)—Temperature of the air passing by the Processor
Mezzanine Board (PMB) at the bottom of the FPC.
• Temperature (Intake)—Temperature of the air flowing into the chassis.
• Temperature (Exhaust)—Exhaust temperatures for multiple zones (Exhaust
A and Exhaust B).
• Temperature (TLn)-–Temperature of the specified Lookup ASIC (TL) of the
packet forwarding engine on the FPC.
• Temperature (TQn)-–Temperature of the specified Queuing and Memory
Interface ASIC (TQ) of the packet forwarding engine on the FPC.
Temperature (PTX
Series)
all levelsTotal percentage of CPU being used by the FPC's processor.Total CPU
Utilization (%)
none specifiedOf the total CPU being used by the FPC's processor, the percentage being used
for interrupts.
Interrupt CPU
Utilization (%)
none specifiedInformation about the Routing Engine's CPU utilization in the past 1 minute.1 min CPU
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
none specifiedInformation about the Routing Engine's CPU utilization in the past 5 minutes.5 min CPU
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
none specifiedInformation about the Routing Engine's CPU utilization in the past 15 minutes.15 min CPU
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
Copyright © 2017, Juniper Networks, Inc.2042
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English