advertising-router (address | self)—(Optional) Display the LSAs advertised either by a
particular routing device or by this routing device.
area area-id—(Optional) Display the LSAs in a particular area.
asbrsummary—(Optional) Display summary AS boundary router LSA entries.
external—(Optional) Display external LSAs.
instance instance-name—(Optional) Display all OSPF database information under the
named routing instance.
link-local—(Optional) Display information about link-local LSAs.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
lsa-id lsa-id—(Optional) Display the LSA with the specified LSA identifier.
netsummary—(Optional) Display summary network LSAs.
network—(Optional) Display information about network LSAs.
nssa—(Optional) Display information about not-so-stubby area (NSSA) LSAs.
opaque-area—(Optional) Display opaque area-scope LSAs.
router—(Optional) Display information about router LSAs.
Required Privilege
Level
view
Related
Documentation
clear (ospf | ospf3) database•
List of Sample Output show ospf database on page 2815
show ospf database on page 2816
show ospf database brief on page 2816
show ospf database detail on page 2816
show ospf database extensive on page 2817
show ospf database summary on page 2820
show ospf database opaque-area detail on page 2820
Output Fields Table 184 on page 2813 describes the output fields for the show ospf database command.
Output fields are listed in the approximate order in which they appear.
Table 184: show ospf database Output Fields
Level of OutputField DescriptionField Name
All levelsArea number. Area 0.0.0.0 is the backbone area.area
2813Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
