interface interface-name—(Optional) Display information about OSPF neighbors for
the specified logical interface.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
neighbor—(Optional) Display information about the specified OSPF neighbor.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(OSPFv3 only) (Optional)
Display information about the OSPF neighbors for the specified OSPFv3 realm, or
address family. Use the realm option to specify an address family for OSPFv3 other
than IPv6 unicast, which is the default.
Required Privilege
Level
view
Related
Documentation
clear (ospf | ospf3) neighbor•
List of Sample Output show ospf neighbor brief on page 2848
show ospf neighbor detail on page 2848
show ospf neighbor extensive on page 2849
show ospf3 neighbor detail on page 2850
show ospf neighbor area area-id on page 2850
show ospf neighbor interface interface-name on page 2850
show ospf3 neighbor instance all (OSPFv3 Multiple Family Address Support
Enabled) on page 2850
Output Fields Table 189 on page 2846 lists the output fields for the show(ospf| ospf3) neighbor command.
Output fields are listed in the approximate order in which they appear.
Table 189: show (ospf | ospf3) neighbor Output Fields
Level of OutputField DescriptionField Name
All levelsAddress of the neighbor.Address
All levelsInterface through which the neighbor is reachable.Interface
Copyright © 2017, Juniper Networks, Inc.2846
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
