Juniper ACX2000 Configuration Guide

Table 223: show route forwarding-table Output Fields (continued)
Level of OutputField DescriptionField Name
All levelsThe features and protocols that have been enabled for a given routing table.
This field can contain the following values:
• BUM hashing—BUM hashing is enabled.
• MAC Stats—Mac Statistics is enabled.
• Bridging—Routing instance is a normal layer 2 bridge.
• No VLAN—No VLANs are associated with the bridge domain.
• All VLANs—The vlan-id all statement has been enabled for this bridge domain.
• Single VLAN—Single VLAN ID is associated with the bridge domain.
• MAC action drop—New MACs will be dropped when the MAC address limit
is reached.
• Dual VLAN—Dual VLAN tags are associated with the bridge domain
• No local switching—No local switching is enabled for this routing instance..
• Learning disabled—Layer 2 learning is disabled for this routing instance.
• MAC limit reached—The maximum number of MAC addresses that was
configured for this routing instance has been reached.
• VPLS—The VPLS protocol is enabled.
• No IRB l2-copy—The no-irb-layer-2-copy feature is enabled for this routing
instance.
• ACKed by all peers—All peers have acknowledged this routing instance.
• BUM Pruning—BUM pruning is enabled on the VPLS instance.
• Def BD VXLAN—VXLAN is enabled for the default bridge domain.
• EVPN—EVPN protocol is enabled for this routing instance.
• Def BD OVSDB—Open vSwitch Database (OVSDB) is enabled on the default
bridge domain.
• Def BD Ingress replication—VXLAN ingress node replication is enabled on the
default bridge domain.
• L2 backhaul—Layer 2 backhaul is enabled.
• FRR optimize—Fast reroute optimization
• MAC pinning—MAC pinning is enabled for this bridge domain.
• MAC Aging Timer—The MAC table aging time is set per routing instance.
• EVPN VXLAN—This routing instance supports EVPN with VXLAN
encapsulation.
• PBBN—This routing instance is configured as a provider backbone bridged
network.
• PBN—This routing instance is configured as a provider bridge network.
• ETREE—The ETREE protocol is enabled on this EVPN routing instance.
• ARP/NDP suppression—EVPN ARP NDP suppression is enabled in this routing
instance.
• Def BD EVPN VXLAN—EVPN VXLAN is enabled for the default bridge domain.
• MPLS control word—Control word is enabled for this MPLS routing instance.
Enabled protocols
All levelsAddress family (for example, IP, IPv6, ISO, MPLS, and VPLS).Address family
detail extensiveDestination of the route.Destination
3049Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English