Juniper ACX2000

Table 232: show services rpm rfc2544-benchmarking test-id Output Fields (continued)
Level of OutputField DescriptionField Name
detailAggregated minimum latency in nanoseconds.Min(ns)
detailAggregated average latency in nanoseconds.Avg(ns)
detailAggregated maximum latency in nanoseconds.Max(ns)
detailAggregated probe latency in nanoseconds.Probe(ns)
detailResults of the latency test completed for a particular packet size.Result of the
iteration runs
(Latency)
detailAverage of the minimum latency in nanoseconds.Avg (min) Latency
detailAverage of the average latency in nanoseconds.Avg (avg) latency
detailAverage of the maximum latency in nanoseconds.Avg (Max) latency
detailAverage of the probe latency in nanoseconds.Avg (probe) latency
detail summaryConsolidated statistics of the latency test.RFC2544 Latency
test results
summary:
detail summarySize of the test packet in bytes.Packet Size
detail summaryTheoretical frame rate in packets-per-second.Theoretical rate
(pps)
detail summaryNumber of transmitted packets.Tx Packets
detail summaryNumber of received packets.Rx Packets
detail summaryDisplays the latency parameters.Latency
detail summaryAggregated minimum latency in nanoseconds.Min(ns)
detail summaryAggregated average latency in nanoseconds.Avg(ns)
detail summaryAggregated maximum latency in nanoseconds.Max(ns)
detail summaryAggregated probe latency in nanoseconds.Probe(ns)
detail(ACX Series routers only) Details of the back-to-back frames or bursty
frames test.
Rfc2544
Back-Back test
information :
detailLength of the first burst when test frames are sent, as a measure of number of
seconds at the rate of Kbps.
Initial burst length:
Copyright © 2017, Juniper Networks, Inc.3166
ACX Series Universal Access Router Configuration Guide