Anritsu MS2840A - Page 1066

Chapter
３
Native Device Message List
3-40
Table 3.10.6-1 Spectrum Emission Mask measurement function setting messages (Cont’d)
Function Command Query Response Remarks
Spectrum Emission Mask Limit
Side
SEM:OFFS:SIDE side SEM:OFFS:SIDE? side
Spectrum Emission Mask Trace
Point
SEM:SWE:POIN integer SEM:SWE:POIN? integer
Spectrum Emission Mask
Sweep Time
SEM:SWE:TIME time SEM:SWE:TIME? time
Spectrum Emission Mask
Sweep Time Auto/Manual
SEM:SWE:TIME:AUTO
switch_com
SEM:SWE:TIME:AUTO? switch_res
switch_com:
= ON|OFF|1|0
Spectrum Emission Mask Auto
Sweep Time Select
SEM:SWE:TIME:AUTO:MOD
E mode
SEM:SWE:TIME:AUTO:MO
DE?
mode
mode
: Sweep mode
= NORM|FAST
Spectrum Emission Mask
Reference Type
SEM:TYPE type SEM:TYPE? type
type
: Reference type
= TPR|PKR|FIX
Spectrum Emission Mask
Result Type
DISP:SEM:RES:TYPE type
DISP:SEM:RES:TYPE? type
type
: Result type
= PEAK|MARG
Spectrum Emission Mask
Configure
CONF:SEM --- ---
Spectrum Emission Mask
Initiate
INIT:SEM --- ---
Couple Ref & ATT
SEM:RAC switch_com SEM:RAC? switch_res
switch_com
:
= ON|OFF|1|0