Anritsu MS2840A - Page 1067

3.10 Measure Function Settings
3-41
Native Device Message List
3
Native Device Message List
3
Table 3.10.6-1 Spectrum Emission Mask measurement function setting messages (Cont’d)
Function Command Query Response Remarks
Spectrum Emission Mask Fetch
---
FETC:SEM? n
total_judge,ref_power,abs_lower_o
ffset_1,margin_lower_offset_1,fre
q_lower_offset_1,lower_offset_1,a
bs_upper_offset_1,margin_upper_of
fset_1,freq_upper_offset_1,upper_
offset_1,.....,abs_lower_offset_1
2,margin_lower_offset_12,freq_low
er_offset_12,lower_offset_12,abs_
upper_offset_12,margin_upper_offs
et_12,freq_upper_offset_12,upper_
offset_12
(
n=1 or when omitted)
When the result mode is “A”.
total_judge :
Total judgement
result
ref_power :
Reference absolute
power
abs_lower_offset_m :
Peak value of absolute power of
lower Offset-m
abs_upper_offset_m :
Peak value of absolute power of
upper Offset-m
lower_offset_m :
Judgment result of lower Offset-m
upper_offset_m :
Judgment result of upper Offset-m
margin_lower_offset_m :
Minimum value of margin of lower
Offset-m
margin_upper_offset_m :
Minimum value of margin of upper
Offset-m
freq_lower_offset_m :
Frequency of peak level of lower
Offset-m
freq_upper_offset_m :
Frequency of peak level of upper
Offset-m
RES?
Spectrum Emission Mask Read
--- READ:SEM? n
Spectrum Emission Mask
Measure
--- MEAS:SEM? n