Anritsu MS2840A - Page 1068

Chapter
３
Native Device Message List
3-42
Table 3.10.6-1 Spectrum Emission Mask measurement function setting messages (Cont’d)
Function Command Query Response Remarks
Spectrum Emission Mask Fetch
--- FETC:SEM? n
-999.0,ref_power,-999.0,-999.0,0,
-999.0,-999.0,-999.0,-999.0,-999.
0,
-999.0,-999.0,
rel_lower_offset_1,abs_lower_offs
et_1,
freq_lower_offset_1
-999.0,-999.0,
rel_upper_offset_1,abs_upper_offs
et_1,
freq_upper_offset_1....
-999.0,-999.0,
rel_lower_offset_12,abs_lower_off
set_12,
freq_lower_offset_12
-999.0,-999.0,
rel_upper_offset_12,abs_upper_off
set_12,
freq_upper_offset_12
margin_lower_offset_1,margin_uppe
r_offset_1,....
margin_lower_offset_12,margin_upp
er_offset_12
(n=1 or when omitted)
When the result mode is “B”.
ref_power :
Reference absolute
power
abs_lower_offset_m :
Peak value of absolute power of
lower Offset-m
abs_upper_offset_m :
Peak value of absolute power of
upper Offset-m
rel_lower_offset_m :
Peak value of relative power of
lower Offset-m
rel_upper_offset_m :
Peak value of relative power of
upper Offset-m
margin_lower_offset_m :
Minimum value of margin of lower
Offset-m
margin_upper_offset_m :
Minimum value of margin of upper
Offset-m
freq_lower_offset_m :
Frequency of peak level of lower
Offset-m
freq_upper_offset_m :
Frequency of peak level of upper
Offset-m
Spectrum Emission Mask Read
--- READ:SEM? n
Spectrum Emission Mask
Measure
--- MEAS:SEM? n