Anritsu MS2840A - Page 1206

Chapter
４
Native Device Message Details
4-124
When Standard is set to TD-SCDMA (ACP Measurement)
pattern
Parameter to be set
TDD128M1C
Single Carrier
TDD128M2C
2 Carriers
TDD128M3C
3 Carriers
TDD128M4C
4 Carriers
TDD128M5C
5 Carriers
TDD128M6C
6 Carriers
When omitted Single Carrier
When Standard is set to TD-SCDMA (CHP,OBW Measurement)
pattern
Parameter to be set
TDD128M
3GPP TDD 1.28 Mcps Option
When omitted 3GPP TDD 1.28 Mcps Option
When Standard is set to TD-SCDMA (Burst Average Power
Measurement)
pattern
Parameter to be set
MEAN
5 ms Subframe
(Power measurement of 1 subframe)
When omitted 5 ms Subframe
When Standard is set to TD-SCDMA (Spectrum Emission Mask
Measurement)
pattern
Parameter to be set
DLT34
DL Trace Point Tune 34 dBm≤P
DLT26
DL Trace Point Tune 26 dBm≤P<34 dBm
DLT26U
DL Trace Point Tune P<26 dBm
ULT53
UL Trace Point Tune -53.5 dBm≤P
ULT55
UL Trace Point Tune -55 dBm≤P
DL34
Downlink Actual 34 dBm≤P
DL26
Downlink Actual 26 dBm≤P<34 dBm
DL26U
Downlink Actual P<26 dBm
UL53
Uplink Actual -53.5 dBm≤P
UL55
Uplink Actual -55 dBm≤P
DLF34
Downlink Fast 34 dBm≤P
DLF26
Downlink Fast 26 dBm≤P<34 dBm
DLF26U
Downlink Fast P<26 dBm
ULF53
Uplink Fast -53.5 dBm≤P
ULF55
Uplink Fast -55 dBm≤P
When omitted DL Trace Point Tune 34 dBm≤P