Anritsu MS2840A - Page 1207

Chapter
４
Native Device Message Details
4-125
4
Native Device Message Details
When Standard is set to XG-PHS (OBW Measurement)
pattern
Parameter to be set
10MBW
10 MHz BW
20MBW
20 MHz BW
When omitted 10 MHz BW
When Standard is set to XG-PHS (CHP Measurement)
pattern
Parameter to be set
MEAN_10MBW
Mean Power 10 MHz BW
MEAN_20MBW
Mean Power 20 MHz BW
When omitted Mean Power 10 MHz BW
When Standard is set to XG-PHS (Spectrum Emission Mask
Measurement)
pattern
Parameter to be set
BS_10MBW
Base station channel interval: 10 MHz
UE_10MBW
Mobile station channel interval: 10 MHz
When omitted Base station channel interval: 10 MHz
When Standard set to CDMA2000 Forward Link (ACP, Burst Average,
Channel Power, OBW measurement)
pattern
Parameter to set
CDMA2KFWD
CDMA2000 Forward Link
When omitted CDMA2000 Forward Link
When Standard set to CDMA2000 Forward Link (Spectrum Emission
Mask setting)
pattern
Parameter to set
BC0_PLT28
Band Class 0,2,5,7,9,10 (Pout<28 dBm)
BC0_PLT33
Band Class 0,2,5,7,9,10 (28 dBm≤Pout<33 dBm)
BC0_PGT33
Band Class 0,2,5,7,9,10 (Pout≥33 dBm)
BC1_PLT28
Band Class 1,4,8,14,15 (Pout<28 dBm)
BC1_PLT33
Band Class 1,4,8,14,15 (28 dBm≤Pout<33 dBm)
BC1_PGT33
Band Class 1,4,8,14,15 (Pout≥33 dBm)
BC6
Band Class 6 (Pout<28 dBm)
BC6_PLT33
Band Class 6 (28 dBm≤Pout<33 dBm)
BC6_PGT33
Band Class 6 (Pout≥33 dBm)
BC11
Band Class 11,12
When omitted Band Class 0,2,5,7,9,10 (Pout<28 dBm)