Anritsu MS2840A - Page 344

Chapter 2 SCPI Device Message Details
2-334
When Standard is set to CDMA2000 Forward Link (Spectrum Emission
Mask measurement)
<pattern>
Parameter to be set
BC0_PLT28
Band Class 0,2,5,7,9,10 (Pout < 28 dBm)
BC0_PLT33
Band Class 0,2,5,7,9,10 (28 dBm ≤ Pout < 33
dBm)
BC0_PGT33
Band Class 0,2,5,7,9,10 (Pout ≥ 33 dBm)
BC1_PLT28
Band Class 1,4,8,14,15 (Pout < 28 dBm)
BC1_PLT33
Band Class 1,4,8,14,15 (28 dBm ≤ Pout < 33
dBm)
BC1_PGT33
Band Class 1,4,8,14,15 (Pout ≥ 33 dBm)
BC6
Band Class 6(Pout<28 dBm)
BC6_PLT33
Band Class 6 (28 dBm≤Pout<33 dBm)
BC6_PGT33
Band Class 6 (Pout≥33 dBm)
BC11
Band Class 11,12
When omitted: Band Class 0,2,5,7,9,10
(Pout < 28 dBm)
When Standard is set to EV-DO Forward Link (ACP, Burst Average,
Channel Power, OBW measurement)
<pattern>
Parameter to be set
EVDOFWD
EV-DO Forward Link
When omitted: EV-DO Forward Link
When Standard is set to EV-DO Forward Link (Spectrum Emission
Mask measurement)
<pattern>
Parameter to be set
BC0 B
and Class 0,2,5,7,9,10
BC1
Band Class 1,4,14,15
BC6
Band Class 6,8,13
BC11
Band Class 11,12
When omitted: Band Class 0,2,5,7,9,10
When Standard is set to ISDB-Tmm (Channel Power measurement)
<pattern>
Parameter to be set
MEAN_14M2BW
14.2 MHz BW
MEAN_5M6BW
5.6 MHz BW
When omitted: 14.2 MHz BW
When Standard is set to ISDB-Tmm (OBW measurement)
<pattern>
Parameter to be set
14M2BW
14.2 MHz BW
5M6BW
5.6 MHz BW
When omitted: 14.2 MHz BW