Anritsu MS2840A - Page 345

2.8 Measure Function
2-335
2
SCPI Device Message Details
When Standard is set to ISDB-Tmm (Spectrum Emission Mask
measurement)
<pattern>
Parameter to be set
14M2BW
14.2 MHz BW
14M2BW_ABS
14.2 MHz BW (ABS)
5M6BW
5.6 MHz BW
When omitted: 14.2 MHz BW
When Standard is set to ISDB-T
SB
(Channel Power measurement)
<pattern>
Parameter to be set
MEAN_3M9BW
3.9 MHz BW
When omitted: 3.9 MHz BW
When Standard is set to ISDB-T
SB
(OBW measurement)
<pattern>
Parameter to be set
3M9BW
3.9 MHz BW
When omitted: 3.9 MHz BW
When Standard is set to ISDB-T
SB
(Spectrum Emission Mask
measurement)
<pattern>
Parameter to be set
3M9BW
3.9 MHz BW
When omitted: 3.9 MHz BW
When Standard is set to ISDB-T (Channel Power measurement)
<pattern>
Parameter to be set
MEAN_5M6BW
5.6 MHz BW
When omitted: 5.6 MHz BW
When Standard is set to ISDB-T (OBW measurement)
<pattern>
Parameter to be set
5M6BW
5.6 MHz BW
When omitted: 5.6 MHz BW
When Standard is set to ISDB-T (Spectrum Emission Mask
measurement)
<pattern>
Parameter to be set
5M6BW
5.6 MHz BW
When omitted: 5.6 MHz BW
When Standard is set to WLAN (ACP measurement)
<pattern>
Parameter to be set
T403_18MSPAN
TELEC T-403 5 GHz Low Power Data