2.13 Spectrum Emission Mask
2-685
2
SCPI Device Message Details
Details
This function outputs the measurement result at the Spectrum Emission
Mask measurement performed last. It is possible to output the
measurement result in a state that the measurement has already been
done, and in a different style.
You can use the READ command if you perform a measurement along
with starting a sweep again.
The return value of this function varies according to the result
mode.(cf. :SYSTem:RESult:MODE)
Example of Use
To obtain the peak value of the absolute power for SEM measurement (n
= 10).
FETC:SEM10?
>
-999.0,-999.0,-100.000,-100.000,-60.000,-60.000,45.000,-
45.000,-30.000,-30.000,-10.000,-10.000,0.000,0.000
To Next Page
Loading...
