summary—(Optional) Display a summary of DHCP client information.
Required Privilege
Level
view
Related
Documentation
Clearing DHCP Bindings for Subscriber Access•
• clear dhcp relay binding on page 1792
List of Sample Output show dhcp relay binding on page 2458
show dhcp relay binding detail on page 2458
show dhcp relay binding interface on page 2458
show dhcp relay binding interface vlan-id on page 2459
show dhcp relay binding interface svlan-id on page 2459
show dhcp relay binding ip-address on page 2459
show dhcp relay binding mac-address on page 2459
show dhcp relay binding session-id on page 2459
show dhcp relay binding <interfaces-vlan> on page 2459
show dhcp relay binding <interfaces-wildcard> on page 2459
show dhcp relay binding summary on page 2460
Output Fields Table 140 on page 2456 lists the output fields for the show dhcp relay binding command.
Output fields are listed in the approximate order in which they appear.
Table 140: show dhcp relay binding Output Fields
Level of
OutputField DescriptionField Name
summarySummary counts of the total number of DHCP clients and the
number of DHCP clients in each state.
number clients,(number init, number bound,
number selecting, number requesting, number
renewing, number rebinding, number
releasing)
brief detailIP address of the DHCP client.IP address
brief detailSession ID of the subscriber session.Session Id
detailRemote ID generated by the Option 82 Agent Remote ID
(suboption 1)
Generated Remote ID
brief detailHardware address of the DHCP client.Hardware address
brief detailNumber of seconds in which the lease expires.Expires
Copyright © 2017, Juniper Networks, Inc.2456
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
