interconnect-device name—
— (QFabric systems only) (Optional) Display the status of the chassis and interface
status LEDs for the Interconnect device.
node-device name— (QFabric systems only) (Optional) Display the status of the chassis
and interface status LEDs for the Node device.
Required Privilege
Level
view
Related
Documentation
Chassis Status LEDs in EX2200 Switches•
• Chassis Status LEDs in EX3200 Switches
• Chassis Status LEDs in EX4200 Switches
• Chassis Status LEDs in EX4500 Switches
• Chassis Status LEDs in an EX8200 Switch
• Chassis Status LEDs on a QFX3500 Device
• Chassis Status LEDs in the QFX3600 and QFX3600-I Device
• Management Port LEDs on a QFX3500 Device
• Management Port LEDs in the QFX3600 and QFX3600-I Device
• Chassis Status LEDs on a QFX3008-I Interconnect Device
• Control Board LEDs on a QFX3008-I Interconnect Device
List of Sample Output show chassis led (EX2200 Switch) on page 2319
show chassis led on page 2320
show chassis led fpc-slot 0 on page 2321
show chassis led (EX Series) on page 2321
show chassis led node-device (QFabric System Node Device) on page 2322
show chassis led interconnect-device (QFabric System - QFX3600-I Interconnect
Device) on page 2323
show chassis led interconnect-device (QFabric System - QFX3008-I Interconnect
Device) on page 2323
Output Fields Table 119 on page 1864 lists the output fields for the show chassis led command. Output
fields are listed in the approximate order in which they appear.
Copyright © 2017, Juniper Networks, Inc.2316
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
