Infineon TRAVEO T2G - Page 1012

Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
DRIVE_SEL_TWO 2 Traveo II: GPIO_STD/GPIO_ENH: 1/2 drive strength:
GPIO drives current at 1/2 of its max rated spec.
Traveo II:_GPIO_SMC: GPIO 1/2 drive strength.
Traveo II:_HSIO_STD: GPIO 1/2 drive strength.
PSoC 6: GPIO cells and HSIO_STD cells: 1/4 drive
strength. GPIO drives current at 1/4 of its max rated
spec.
DRIVE_SEL_THREE 3 Traveo II: GPIO_STD/GPIO_ENH: 1/4 drive strength:
GPIO drives current at 1/4 of its max rated spec.
Traveo II:_GPIO_SMC: GPIO 1/4 drive strength.
Traveo II:_HSIO_STD: GPIO 1/4 drive strength.
PSoC 6: GPIO cells and HSIO_STD cells: 1/8 drive
strength. GPIO drives current at 1/8 of its max rated
spec.
18:19 DRIVE_SEL1 RW R 0 Sets the GPIO drive strength for IO pin 1
20:21 DRIVE_SEL2 RW R 0 Sets the GPIO drive strength for IO pin 2
22:23 DRIVE_SEL3 RW R 0 Sets the GPIO drive strength for IO pin 3
24:25 DRIVE_SEL4 RW R 0 Sets the GPIO drive strength for IO pin 4
26:27 DRIVE_SEL5 RW R 0 Sets the GPIO drive strength for IO pin 5
28:29 DRIVE_SEL6 RW R 0 Sets the GPIO drive strength for IO pin 6
30:31 DRIVE_SEL7 RW R 0 Sets the GPIO drive strength for IO pin 7
1012
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers