Infineon TRAVEO T2G - 3.8.1.5 CM0 P_DWT_DWT_FUNCTION0

Technical Reference Manual 002-29852 Rev. *B
3.8.1.5 CM0P_DWT_DWT_FUNCTION0
Description:
Watchpoint Comparator Function
Address:
0xE0001028
Offset:
0x28
Retention:
Retained
IsDeepSleep:
No
Comment:
Controls the operation of the comparator
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:4] FUNCTION [3:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:25] MATCHED
[24:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 FUNCTION RW R 0 Select action on comparator match.
DISABLE 0 Disabled
IADDR 4 PC watchpoint event
DADDR_RO 5 Watchpoint event
DADDR_WO 6 Watchpoint event
DADDR_RW 7 Watchpoint event
24 MATCHED R RW 0 Comparator match. It indicates that the operation
defined by FUNCTION has occurred since the bit was
last read:
0 the associated comparator has matched.
1 the associated comparator has not matched.
Reading the register clears this bit to 0.
135
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers