Infineon TRAVEO T2G - 4.13.2.12 CM4_DWT_COMP1

Technical Reference Manual 002-29852 Rev. *B
4.13.2.12 CM4_DWT_COMP1
Description:
Comparator registers
Address:
0xE0001030
Offset:
0x30
Retention:
Retained
IsDeepSleep:
No
Comment:
The COMPn register characteristics are:
Purpose: Provides a reference value for use by comparator n.
Usage constraints: The operation of comparator n depends also on the registers MASKn and
FUNCTIONn, see Comparator Mask registers, MASKn and Comparator Function registers,
FUNCTIONn on Arm TRM page C1-806.
Configurations:
Implemented only when CTRL.NUMCOMP is nonzero, see Control register, CTRL on Arm
TRM page C1-797.
CTRL.NUMCOMP defines the number of implemented COMPn registers. Implemented
COMPn registers number from 0 to (NUMCOMP-1). Unimplemented registers are UNK/SBZP.
Attributes: See Table C1-21 on Arm TRM page C1-797.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name COMP [7:0]
Bits 15 14 13 12 11 10 9 8
Name COMP [15:8]
Bits 23 22 21 20 19 18 17 16
Name COMP [23:16]
Bits 31 30 29 28 27 26 25 24
Name COMP [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 COMP RW R 0 Reference value for comparison.
341
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers