Infineon TRAVEO T2G - 4.13.8.4 CM4_TRCCTI_CTIAPPCLEAR

Technical Reference Manual 002-29852 Rev. *B
4.13.8.4 CM4_TRCCTI_CTIAPPCLEAR
Description:
CTI Application Trigger Clear Register
Address:
0xE0080018
Offset:
0x18
Retention:
Retained
IsDeepSleep:
No
Comment:
The CTI Application Trigger Clear Register is write-only. A write to this register causes a
channel event to be cleared, corresponding to the bit written to.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:4] APPCLEAR [3:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 APPCLEAR W R 0 Clears corresponding bits in the CTIAPPSET register.
1 = application trigger disabled in the CTIAPPSET
register 0 = no effect.
There is one bit of the register for each channel.
543
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers