Technical Reference Manual 002-29852 Rev. *B
26.8.50.4 MCWDT_CTR2_CNT
Description:
MCWDT Subcounter 2 Count Register
Address:
0x40268088
Offset:
0x88
Retention:
Retained
IsDeepSleep:
Yes
Comment:
Count value for this MCWDT subcounter 2. Writes are ignored when this subcounter is
enabled or when it is locked (i.e. corresponding LOCK.MCWDT_LOCK<>0).
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name CNT2 [7:0]
Bits 15 14 13 12 11 10 9 8
Name CNT2 [15:8]
Bits 23 22 21 20 19 18 17 16
Name CNT2 [23:16]
Bits 31 30 29 28 27 26 25 24
Name CNT2 [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 CNT2 RW A 0 Current value of subcounter 2 for this MCWDT. This
field may lag the actual count value by up to one clk_lf
cycle, due to internal synchronization. When this
subcounter is disabled and unlocked, the count value
can be written for verification and debugging purposes.
Software writes are always ignored when the
subcounter is enabled.
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers