Infineon TRAVEO T2G - 2.3.9.6.29 CANFD_CH_RXBC

Technical Reference Manual 002-29852 Rev. *B
2.3.9.6.29 CANFD_CH_RXBC
Description:
Rx Buffer Configuration
Address:
0x405200AC
Offset:
0xAC
Retention:
Retained
IsDeepSleep:
No
Comment:
Protected Write.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [1:0]
Bits 15 14 13 12 11 10 9 8
Name RBSA [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
2:15 RBSA RW R 0 Rx Buffer Start Address
Configures the start address of the Rx Buffers section
in the Message RAM (32-bit word address).
Also used to reference debug messages A,B,C.
86
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers