Infineon TRAVEO T2G - 4.13.8.9 CM4_TRCCTI_CTITRIGOUTSTATUS

Technical Reference Manual 002-29852 Rev. *B
4.13.8.9 CM4_TRCCTI_CTITRIGOUTSTATUS
Description:
CTI Trigger Out Status Register
Address:
0xE0080134
Offset:
0x134
Retention:
Retained
IsDeepSleep:
No
Comment:
The CTI Trigger Out Status Register provides the status of the CTITRIGOUT outputs.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name TRIGOUTSTATUS [7:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:7 TRIGOUTSTATUS R RW 0 Shows the status of the CTITRIGOUT outputs.
1 = CTITRIGOUT is active
0 = CTITRIGOUT is inactive (reset).
There is one bit of the register for each trigger output.
548
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers