Infineon TRAVEO T2G - 8.5.3.2 DMAC_CH_IDX

Technical Reference Manual 002-29852 Rev. *B
8.5.3.2 DMAC_CH_IDX
Description:
Channel current indices
Address:
0x402A1010
Offset:
0x10
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name X [7:0]
Bits 15 14 13 12 11 10 9 8
Name X [15:8]
Bits 23 22 21 20 19 18 17 16
Name Y [23:16]
Bits 31 30 29 28 27 26 25 24
Name Y [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:15 X R W Undefined Specifies the X loop index. In the range of [0,
X_COUNT], with X_COUNT taken from the current
descriptor.
Note: HW sets this field to '0' when it loads a
descriptor.
16:31 Y R W Undefined Specifies the Y loop index, with Y_COUNT taken from
the current descriptor.
Note: HW sets this field to '0' when it loads a
descriptor..
806
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers