Infineon TRAVEO T2G - 4.13.6.22 CM4_CM4 CTI_ITCTRL

Technical Reference Manual 002-29852 Rev. *B
4.13.6.22 CM4_CM4CTI_ITCTRL
Description:
Integration Mode Control Register
Address:
0xE0042F00
Offset:
0xF00
Retention:
Retained
IsDeepSleep:
No
Comment:
This register enables the component to switch from a functional mode, the default behavior, to
integration mode where the inputs and outputs of the component can be directly controlled for
the purpose of integration testing and topology solving.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:1] MODE [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 MODE RW R 0 When set, the component enters integration mode,
enabling topology detection or integration testing to be
performed. At reset the component must enter
functional mode. If no integration functionality is
implemented, this register must read as zero.
504
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers