Infineon TRAVEO T2G - 2.3.9.6.48 CANFD_CH_TTRMC

Technical Reference Manual 002-29852 Rev. *B
2.3.9.6.48 CANFD_CH_TTRMC
Description:
TT Reference Message Configuration
Address:
0x40520104
Offset:
0x104
Retention:
Retained
IsDeepSleep:
No
Comment:
Protected Write.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name RID [7:0]
Bits 15 14 13 12 11 10 9 8
Name RID [15:8]
Bits 23 22 21 20 19 18 17 16
Name RID [23:16]
Bits 31 30 29 28 27 26 25 24
Name RMPS
[31:31]
XTD [30:30] None
[29:29]
RID [28:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:28 RID RW R 0 Reference Identifier
Identifier transmitted with reference message and used
for reference message filtering. Standard or
extended reference identifier depending on bit XTD. A
standard identifier has to be written to
ID[28:18].
30 XTD RW R 0 Extended Identifier
0= 11-bit standard identifier
1= 29-bit extended identifier
31 RMPS RW R 0 Reference Message Payload Select
Ignored in case of time slaves.
0= Reference message has no additional payload
1= The following elements are taken from Tx Buffer 0:
Message Marker MM, Event FIFO Control EFC, Data
Length Code DLC, Data Bytes DB
Level 1: bytes 2-8, Level 0,2: bytes 5-8)
105
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers