Infineon TRAVEO T2G - 16.25.2 HSIOM_MONITOR_CTL_0

Technical Reference Manual 002-29852 Rev. *B
16.25.2 HSIOM_MONITOR_CTL_0
Description:
Power/Ground Monitor cell control 0
Address:
0x40302200
Offset:
0x2200
Retention:
Retained
IsDeepSleep:
No
Comment:
This register controls the connectivity of PWR/GND monitor cells to either AMUX bus A or B
respectively.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name MONITOR_EN [7:0]
Bits 15 14 13 12 11 10 9 8
Name MONITOR_EN [15:8]
Bits 23 22 21 20 19 18 17 16
Name MONITOR_EN [23:16]
Bits 31 30 29 28 27 26 25 24
Name MONITOR_EN [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 MONITOR_EN RW R 0 control for switch, which connects the power/ground
supply to AMUXBUS_A/B respectively when switch is
closed:
'0': switch open.
'1': switch closed.
1018
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers