EasyManua.ls Logo

Infineon TRAVEO T2G - 26.8.51.7 WDT_LOCK

Infineon TRAVEO T2G
1825 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Reference Manual 002-29852 Rev. *B
26.8.51.7 WDT_LOCK
Description:
WDT Lock register
Address:
0x4026C040
Offset:
0x40
Retention:
Retained
IsDeepSleep:
No
Comment:
Lock or unlock the registers in this WDT
Default:
0x3
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:2] WDT_LOCK [1:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:1 WDT_LOCK RW A 3 Prohibits writing control and configuration registers
related to this WDT when not equal 0 (as specified in
the other register descriptions). Requires at least two
different writes to unlock.
Note that this field is 2 bits to force multiple writes only.
This register also locks the clk_ilo0 settings.
NO_CHG 0 No effect
CLR0 1 Clears bit 0
CLR1 2 Clears bit 1
SET01 3 Sets both bits 0 and 1
1731
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers

Table of Contents

Other manuals for Infineon TRAVEO T2G

Related product manuals