Infineon TRAVEO T2G - 14.2.27.11 FLASHC_MAIN_FLASH_SAFETY

Technical Reference Manual 002-29852 Rev. *B
14.2.27.11 FLASHC_MAIN_FLASH_SAFETY
Description:
Main (Code) Flash Security enable
Address:
0x4024F400
Offset:
0x400
Retention:
Not Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:1] MAINFLASH
WRITEENABL
E [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 MAINFLASH
WRITEENABLE
RW R 0 '0': Main Flash embedded operations are blocked
'1': Main Flash embedded operations are enabled
975
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers