Infineon TRAVEO T2G - 23.9.30 SCB_INTR_CAUSE

Technical Reference Manual 002-29852 Rev. *B
23.9.30 SCB_INTR_CAUSE
Description:
Active clocked interrupt signal
Address:
0x40600E00
Offset:
0xE00
Retention:
Retained
IsDeepSleep:
No
Comment:
Enables software to determine the source of the combined interrupt output signals
'interrupt_ic', 'interrupt_ec' and 'interrupt'.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:6] SPI_EC
[5:5]
I2C_EC
[4:4]
RX [3:3] TX [2:2] S [1:1] M [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 M R W 0 Master interrupt active ('interrupt_master'):
INTR_M_MASKED != 0.
1 S R W 0 Slave interrupt active ('interrupt_slave'):
INTR_S_MASKED != 0.
2 TX R W 0 Transmitter interrupt active ('interrupt_tx'):
INTR_TX_MASKED != 0.
3 RX R W 0 Receiver interrupt active ('interrupt_rx'):
INTR_RX_MASKED != 0.
4 I2C_EC R W 0 Externally clock I2C interrupt active ('interrupt_i2c_ec'):
INTR_I2C_EC_MASKED != 0.
5 SPI_EC R W 0 Externally clocked SPI interrupt active
('interrupt_spi_ec'): INTR_SPI_EC_MASKED != 0.
1428
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers