Technical Reference Manual 002-29852 Rev. *B
2.3.9.6.40 CANFD_CH_TXBTO
Description:
Tx Buffer Transmission Occurred
Address:
0x405200D8
Offset:
0xD8
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name TO [7:0]
Bits 15 14 13 12 11 10 9 8
Name TO [15:8]
Bits 23 22 21 20 19 18 17 16
Name TO [23:16]
Bits 31 30 29 28 27 26 25 24
Name TO [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 TO R RW 0 Transmission Occurred
Each Tx Buffer has its own Transmission Occurred bit.
The bits are set when the corresponding
TXBRP bit is cleared after a successful transmission.
The bits are reset when a new transmission
is requested by writing a '1' to the corresponding bit of
register TXBAR.
0= No transmission occurred
1= Transmission occurred
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
