EasyManua.ls Logo

Infineon TRAVEO T2G - 4.13.8.13 CM4_TRCCTI_ASICCTL

Infineon TRAVEO T2G
1825 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Reference Manual 002-29852 Rev. *B
4.13.8.13 CM4_TRCCTI_ASICCTL
Description:
External Multiplexor Control Register
Address:
0xE0080144
Offset:
0x144
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name ASICCTL [7:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:7 ASICCTL RW R 0 Implementation-defined ASIC control, value written to
the register is output on ASICCTL[7:0].
If external multiplexing of trigger signals is
implemented then the number of multiplexed signals
on each trigger must be reflected within the Device ID
Register. This is done within a Verilog define
EXTMUXNUM. See ECT CoreSight defined registers
on Arm TRM page 4-28.
552
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers

Table of Contents

Other manuals for Infineon TRAVEO T2G

Related product manuals