Infineon TRAVEO T2G - 12.12.17 COMP_STRUCT; 12.12.17.1 EVTGEN_COMP_STRUCT_COMP_CTL

Technical Reference Manual 002-29852 Rev. *B
12.12.17 COMP_STRUCT
12.12.17.1 EVTGEN_COMP_STRUCT_COMP_CTL
Description:
Comparator control
Address:
0x403F0800
Offset:
0x0
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:2] COMP1
_EN [1:1]
COMP0
_EN [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:17] TR_OUT
_EDGE
[16:16]
Bits 31 30 29 28 27 26 25 24
Name ENABLED
[31:31]
None [30:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 COMP0_EN RW R 0 Active comparator (COMP0) enable:
'0': Disabled. The comparator output 'comp0_out' is '0'.
'1': Enabled.
1 COMP1_EN RW R 0 DeepSleep comparator (COMP1) enable:
'0': Disabled. The comparator output 'comp1_out_lf' is
'0'.
'1': Enabled.
16 TR_OUT_EDGE RW R 0 Specifies the 'tr_out' output trigger:
'0': The trigger is a level sensitive trigger. The Active
comparator output ('comp0_out') is reflected on
'tr_out'.
'1': The trigger is an edge sensitive trigger. Activation
of the Active comparator output (rising edge on
'comp0_out') results in a two cycle '1'/high pulse on
'tr_out'.
31 ENABLED RW R 0 Comparator structure enable:
'0': Disabled.
'1': Enabled.
912
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers