Infineon TRAVEO T2G - 28.4 Register Details; 28.4.1 GRP; 28.4.1.1 CNT; 28.4.1.1.1 TCPWM_GRP_CNT_CTRL

Technical Reference Manual 002-29852 Rev. *B
28.4 Register Details
28.4.1 GRP
28.4.1.1 CNT
28.4.1.1.1 TCPWM_GRP_CNT_CTRL
Description:
Counter control register
Address:
0x40380000
Offset:
0x0
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0xF0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name CC1
_MATCH
_DOWN
_EN [7:7]
CC1
_MATCH
_UP_EN
[6:6]
CC0
_MATCH
_DOWN
_EN [5:5]
CC0
_MATCH
_UP_EN
[4:4]
AUTO
_RELOAD
_LINE_SEL
[3:3]
AUTO
_RELOAD
_PERIOD
[2:2]
AUTO
_RELOAD
_CC1 [1:1]
AUTO
_RELOAD
_CC0 [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:14] PWM_DISABLE_MODE
[13:12]
None
[11:11]
PWM
_SYNC_
KILL [10:10]
PWM
_STOP_ON
_KILL [9:9]
PWM_IMM
_KILL [8:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:22] QUAD_ENCODING
_MODE [21:20]
None
[19:19]
ONE
_SHOT
[18:18]
UP_DOWN_MODE
[17:16]
Bits 31 30 29 28 27 26 25 24
Name ENABLED
[31:31]
DBG
_FREEZE
_EN [30:30]
None [29:27] MODE [26:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 AUTO_RELOAD_CC0 RW R 0 Specifies switching of the CC0 and buffered CC0
values. This field has a function in TIMER, QUAD
(QUAD_RANGE0_CMP, QUAD_RANGE1_CMP
range modes), SR, PWM, PWM_DT and PWM_PR
modes.
Timer, QUAD, SR modes:
'0': never switch.
'1': switch on a compare match 0 event.
PWM, PWM_DT, PWM_PR modes:
'0: never switch.
'1': switch on a terminal count event with an actively
pending switch event.
1789
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers