EasyManua.ls Logo

Infineon TRAVEO T2G - Page 1790

Infineon TRAVEO T2G
1825 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
1 AUTO_RELOAD_CC1 RW R 0 Specifies switching of the CC1 and buffered CC1
values. This field has a function in TIMER, QUAD
(QUAD_RANGE0_CMP, QUAD_RANGE1_CMP
range modes), SR, PWM, PWM_DT and PWM_PR
modes.
Timer, QUAD, SR modes:
'0': never switch.
'1': switch on a compare match 1 event.
PWM, PWM_DT, PWM_PR modes:
'0: never switch.
'1': switch on a terminal count event with an actively
pending switch event.
2 AUTO_RELOAD
_PERIOD
RW R 0 Specifies switching of the PERIOD and buffered
PERIOD values. This field has a function in PWM and
PWM_DT modes.
'0': never switch.
'1': switch on a terminal count event with an actively
pending switch event.
In QUAD mode, QUAD_RANGE0_CMP range mode
this field is used to select the index / wrap-around
capture function.
'0': Captures on index (reload) event. The counter
value is copied to the PERIOD register on an index
(reload) event.
'1': Captures when COUNTER equals 0 or 0xffff. The
counter value is copied to the PERIOD register when
COUNTER equals 0 or 0xffff.
3 AUTO_RELOAD_LINE
_SEL
RW R 0 Specifies switching of the LINE_SEL and
LINE_BUFF_SEL values. This field has a function in
PWM and PWM_PR modes.
'0': never switch.
'1': switch on a terminal count event with an actively
pending switch event.
4 CC0_MATCH_UP_EN RW R 1 Enables / disables the compare match 0 event
generation (COUNTER equals CC0 register) when
counting up (STATUS.DOWN = 0) in CNT_UPDN1/2
mode.
'0': compare match 0 event generation disabled when
counting up
'1': compare match 0 event generation enabled when
counting up
This field has a function in PWM and PWM_DT modes
only.
5 CC0_MATCH_DOWN_EN RW R 1 Enables / disables the compare match 0 event
generation (COUNTER equals CC0 register) when
counting down (STATUS.DOWN = 1) in
CNT_UPDN1/2 mode.
'0': compare match 0 event generation disabled when
counting down
'1': compare match 0 event generation enabled when
counting down
This field has a function in PWM and PWM_DT modes
only.
1790
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers

Table of Contents

Other manuals for Infineon TRAVEO T2G

Related product manuals