Infineon TRAVEO T2G - 19.5.1.4 PASS_SAR_ANA_CAL

Technical Reference Manual 002-29852 Rev. *B
19.5.1.4 PASS_SAR_ANA_CAL
Description:
Current analog calibration values
Address:
0x40900080
Offset:
0x80
Retention:
Retained
IsDeepSleep:
No
Comment:
Hardware can update this register if software sets the CAL_UPD_CMD.UPDATE
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name AOFFSET [7:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:21] AGAIN [20:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:7 AOFFSET RW RW 0 Analog offset correction
16:20 AGAIN RW RW 0 Analog gain correction
1093
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers