Infineon TRAVEO T2G - 17.17.1.6 IPC_STRUCT_LOCK_STATUS

Technical Reference Manual 002-29852 Rev. *B
17.17.1.6 IPC_STRUCT_LOCK_STATUS
Description:
IPC lock status
Address:
0x4022001C
Offset:
0x1C
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name PC [7:4] None [3:2] NS [1:1] P [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:12] MS [11:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name ACQUIRED
[31:31]
None [30:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 P R W Undefined This field specifies the user/privileged access control:
'0': user mode.
'1': privileged mode.
1 NS R W Undefined This field specifies the secure/non-secure access
control:
'0': secure.
'1': non-secure.
4:7 PC R W Undefined This field specifies the protection context that
successfully acquired the lock.
8:11 MS R W Undefined This field specifies the bus master identifier that
successfully acquired the lock.
31 ACQUIRED R R 0 Specifies if the lock is acquired. This field is set to '1', if
a ACQUIRE read transfer successfully acquires the
lock (the ACQUIRE read transfer returns
ACQUIRE.SUCCESS as '1'). If zero, P, NS, PC, and
MS are not valid.
1032
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers