Infineon TRAVEO T2G - 9.3.18.11 DW_CH_STRUCT_TR_CMD

Technical Reference Manual 002-29852 Rev. *B
9.3.18.11 DW_CH_STRUCT_TR_CMD
Description:
Channel software trigger
Address:
0x40288028
Offset:
0x28
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:1] ACTIVATE
[0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 ACTIVATE RW1S A 0 Software trigger. When written with '1', a trigger is
generated which sets 'trigger pending' (only if the
channel is enabled). A read always returns a 0.
890
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers