Infineon TRAVEO T2G - 15.25.7 PRT; 15.25.7.1 GPIO_PRT_OUT

Technical Reference Manual 002-29852 Rev. *B
15.25.7 PRT
15.25.7.1 GPIO_PRT_OUT
Description:
Port output data register
Address:
0x40310000
Offset:
0x0
Retention:
Retained
IsDeepSleep:
No
Comment:
Used to read and write the output data for the IO pins in the port. A register write changes the
output data to the written value. A register read reflects the output data (and not the current
state of the input data for the IO pins). Using this register, Read-Modify-Write sequences are
safely performed on a port with some IO pins configured as inputs.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name OUT7 [7:7] OUT6 [6:6] OUT5 [5:5] OUT4 [4:4] OUT3 [3:3] OUT2 [2:2] OUT1 [1:1] OUT0 [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 OUT0 RW RW 0 IO output data for pin 0
'0': Output state set to '0'
'1': Output state set to '1'
1 OUT1 RW RW 0 IO output data for pin 1
2 OUT2 RW RW 0 IO output data for pin 2
3 OUT3 RW RW 0 IO output data for pin 3
4 OUT4 RW RW 0 IO output data for pin 4
5 OUT5 RW RW 0 IO output data for pin 5
6 OUT6 RW RW 0 IO output data for pin 6
7 OUT7 RW RW 0 IO output data for pin 7
996
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers