Infineon TRAVEO T2G - 25.6.1.5 SMARTIO_PRT_DU_SEL

Technical Reference Manual 002-29852 Rev. *B
25.6.1.5 SMARTIO_PRT_DU_SEL
Description:
Data unit component input selection
Address:
0x403200C0
Offset:
0xC0
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:4] DU_TR0_SEL [3:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:12] DU_TR1_SEL [11:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:20] DU_TR2_SEL [19:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:30] DU_DATA1_SEL [29:28] None [27:26] DU_DATA0_SEL [25:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 DU_TR0_SEL RW R Undefined Data unit input signal 'tr0_in' source selection:
'0': Constant '0'.
'1': Constant '1'.
'2': Data unit output.
'10-3': LUT 7 - 0 outputs.
Otherwise: Undefined.
8:11 DU_TR1_SEL RW R Undefined Data unit input signal 'tr1_in' source selection.
Encoding is the same as for DU_TR0_SEL.
16:19 DU_TR2_SEL RW R Undefined Data unit input signal 'tr2_in' source selection.
Encoding is the same as for DU_TR0_SEL.
24:25 DU_DATA0_SEL RW R Undefined Data unit input data 'data0_in' source selection:
'0': Constant '0'.
'1': chip_data[7:0].
'2': io_data_in[7:0].
'3': DATA.DATA MMIO register field.
28:29 DU_DATA1_SEL RW R Undefined Data unit input data 'data1_in' source selection.
Encoding is the same as for DU_DATA0_SEL.
1622
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers