Infineon TRAVEO T2G - 4.13.8.3 CM4_TRCCTI_CTIAPPSET

Technical Reference Manual 002-29852 Rev. *B
4.13.8.3 CM4_TRCCTI_CTIAPPSET
Description:
CTI Application Trigger Set Register
Address:
0xE0080014
Offset:
0x14
Retention:
Retained
IsDeepSleep:
No
Comment:
The CTI Application Trigger Set Register is read/write. A write to this register causes a
channel event to be raised, corresponding to the bit written to.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:4] APPSET [3:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 APPSET RW R 0 Setting a bit HIGH generates a channel event for the
selected channel. Read:
0 = application trigger inactive (reset)
1 = application trigger active.
Write:
0 = no effect
1 = generate channel event.
There is one bit of the register for each channel.
542
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers