Technical Reference Manual 002-29852 Rev. *B
3.8.3.8 CM0P_SCS_ICPR
Description:
Interrupt Clear-Pending Register
Address:
0xE000E280
Offset:
0x280
Retention:
Retained
IsDeepSleep:
No
Comment:
On writes, clears the status of one or more interrupts to pending. On reads, shows
the pending status of the interrupts.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name CLRPEND [7:0]
Bits 15 14 13 12 11 10 9 8
Name CLRPEND [15:8]
Bits 23 22 21 20 19 18 17 16
Name CLRPEND [23:16]
Bits 31 30 29 28 27 26 25 24
Name CLRPEND [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 CLRPEND RW1C R 0 Changes the state of one or more interrupts to not
pending. Each bit corresponds to the same numbered
interrupt.
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers