Infineon TRAVEO T2G - 26.8.17 PWR_LVD_CTL

Technical Reference Manual 002-29852 Rev. *B
26.8.17 PWR_LVD_CTL
Description:
High Voltage / Low Voltage Detector (HVLVD) Configuration Register
Address:
0x40261020
Offset:
0x1020
Retention:
Retained
IsDeepSleep:
Yes
Comment:
Trim and configuration bits for Voltage Monitoring System.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name HVLVD1
_EN [7:7]
HVLVD1_SRCSEL [6:4] HVLVD1_TRIPSEL [3:0]
Bits 15 14 13 12 11 10 9 8
Name HVLVD1
_EN_HT
[15:15]
HVLVD1
_DPSLP
_EN_HT
[14:14]
None
[13:13]
HVLVD1_TRIPSEL_HT [12:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:19] HVLVD1
_ACTION
[18:18]
HVLVD1_EDGE_SEL
[17:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 HVLVD1_TRIPSEL RW R 0 Threshold selection for HVLVD1. Disable the detector
(HVLVD1_EN=0) before changing the threshold.
0: rise=1.225V (nom), fall=1.2V (nom)
1: rise=1.425V (nom), fall=1.4V (nom)
2: rise=1.625V (nom), fall=1.6V (nom)
3: rise=1.825V (nom), fall=1.8V (nom)
4: rise=2.025V (nom), fall=2V (nom)
5: rise=2.125V (nom), fall=2.1V (nom)
6: rise=2.225V (nom), fall=2.2V (nom)
7: rise=2.325V (nom), fall=2.3V (nom)
8: rise=2.425V (nom), fall=2.4V (nom)
9: rise=2.525V (nom), fall=2.5V (nom)
10: rise=2.625V (nom), fall=2.6V (nom)
11: rise=2.725V (nom), fall=2.7V (nom)
12: rise=2.825V (nom), fall=2.8V (nom)
13: rise=2.925V (nom), fall=2.9V (nom)
14: rise=3.025V (nom), fall=3.0V (nom)
15: rise=3.125V (nom), fall=3.1V (nom)
4:6 HVLVD1_SRCSEL RW R 0 Source selection for HVLVD1
VDDD 0 Select VDDD
AMUXBUSA 1 Select AMUXBUSA (VDDD branch)
RESERVED 2 N/A
VDDIO 3 N/A
AMUXBUSB 4 Select AMUXBUSB (VDDD branch)
7 HVLVD1_EN RW R 0 Enable HVLVD1 voltage monitor. HVLVD1 does not
function during DEEPSLEEP, but it automatically
returns to its configured setting after DEEPSLEEP
wakeup. Do not change other HVLVD1 settings when
enabled.
1652
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers