Infineon TRAVEO T2G - 22.5.2.3.2 PROT_MPU_MPU_STRUCT_ATT

Technical Reference Manual 002-29852 Rev. *B
22.5.2.3.2 PROT_MPU_MPU_STRUCT_ATT
Description:
MPU region attrributes
Address:
0x40234204
Offset:
0x4
Retention:
Retained
IsDeepSleep:
No
Comment:
This register defines a MPU access control register.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:7] NS [6:6] PX [5:5] PW [4:4] PR [3:3] UX [2:2] UW [1:1] UR [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name ENABLED
[31:31]
None [30:29] REGION_SIZE [28:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 UR RW R Undefined User read enable:
'0': Disabled (user, read accesses are NOT allowed).
'1': Enabled (user, read accesses are allowed).
1 UW RW R Undefined User write enable:
'0': Disabled (user, write accesses are NOT allowed).
'1': Enabled (user, write accesses are allowed).
2 UX RW R Undefined User execute enable:
'0': Disabled (user, execute accesses are NOT
allowed).
'1': Enabled (user, execute accesses are allowed).
3 PR RW R Undefined Privileged read enable:
'0': Disabled (privileged, read accesses are NOT
allowed).
'1': Enabled (privileged, read accesses are allowed).
4 PW RW R Undefined Privileged write enable:
'0': Disabled (privileged, write accesses are NOT
allowed).
'1': Enabled (privileged, write accesses are allowed).
5 PX RW R Undefined Privileged execute enable:
'0': Disabled (privileged, execute accesses are NOT
allowed).
'1': Enabled (privileged, execute accesses are
allowed).
6 NS RW R Undefined Non-secure:
'0': Secure (secure accesses allowed, non-secure
access NOT allowed).
'1': Non-secure (both secure and non-secure accesses
allowed).
1338
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers